2-slot chargers
Compact all-rounder The Golisi I2 charger belongs to the family of Golisi smart chargers and allows you to charge two cylindrical batteries with a length of 32-70mm. It comes with a USB port. supplied with electricity and is a compact and reliable companion. With a 2A quick charging slot, you can charge a battery in no time (QuickCharge). An intelligent chip analyzes the inserted battery and automatically adjusts the charging current. A large display gives you all the important values of a charging process in real time. The ideal companion The I2 charger is smaller than the palm of your hand and is therefore the ideal companion for on the go - it fits in any pocket. Since the I2 charger is powered via USB (5V/2A), many cables and socket adapters from other manufacturers are usually compatible and you can save even more luggage. And so that everything is always carefully stowed away, you will receive a suitable transport bag for your I2 charger. Just charge it up With the I2 charger, Golisi makes it easy for you - apart from inserting the battery, the charger takes care of all tasks. The intelligent chip not only recognizes the battery and selects the appropriate charging current, it also monitors the entire charging process and reacts to changes. In conjunction with the built-in sensors, the Golisi I2 charger protects itself again, especially when monitoring the temperature. The chip also recognizes an incorrectly inserted battery and displays an error message. In addition, the chip also monitors overcharging and switches off automatically in this case. Security and sustainability Like all Golisi chargers, the Golisi I2 was designed to be particularly safe. The housing is made of flame-retardant materials and all components inside are arranged in such a way that risks are "minimised to the maximum". The chip is particularly protected against the ingress of moisture. But sustainability also plays a major role today - this is how the I2 charger was prepared for a long use. Military standard load springs promise durability even with >100,000 insertion processes. In addition, you will receive your I2 charger in packaging without air, which is also 99% recyclable. Details Input voltage: DC 5V / 2A Control: DV detection, ODV detection, Overall timing, high voltage test Open circuit voltage: 5V Automatic temperature monitoring Military standard loading springs with >100,000 life Safety: short-circuit protection, overvoltage protection, reverse polarity protection and much more. Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-Ion 2000 MA*1, 1000 MA*2 Ni-mh Ni-cd 500 MA*1, 500 MA*2 CE, FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi I2 charger 1x Transport bag1x Micro USB cable 1x User manual (German) Safety instructions This charger works only with rechargeable Lithium Ion, Nickel Metal Hydride and Nickel Cadmium batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use.
Li-Io charger The Needle 2 charger is the introduction to two-slot charging of cylindrical lithium-ion batteries with a size of 32-70mm. Power is supplied via a USB connection, which means it can be used flexibly almost anywhere. In combination with the compact dimensions and a weight of only 54g, it is the ideal companion - not only for on the go. Easy going A microprocessor works in the Needle 2 charger, which controls and monitors the charging process. This chip automatically recognizes a charging process, starts it, monitors it and stops it as soon as the battery is fully charged. Each slot is addressed individually by the chip. In addition, the chip protects against overcharging with various safety mechanisms, for example, or recognizes batteries that have been inserted the wrong way round. He is also responsible for real-time temperature monitoring. An LED above each slot shows you the current status (ready to charge, charging in progress, charging complete). Can what Although the Needle 2 is one of the cheaper entry-level chargers, it still belongs to the family of Golisi chargers in terms of safety and resilience and doesn't have to hide. Particularly robust materials, which are also flame retardant, ensure long-lasting use. The load springs and their components such as sliding plates and contacts are also designed to be particularly durable. Rubber feet on the underside give the Needle 2 charger a firm footing. Details Output voltage: DC 5 V /1,0 A Open circuit voltage: 4,2 V Output current: 0,5 A / Schacht Automatic temperature monitoring Indicator light: Green: Ready to charge or battery full Red: Charging in progress Flashing: Error Military standard loading springs with >100,000 life Security: short circuit protection, over voltage protection, reverse polarity protection Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-ion 500mA*1 or 500mA*2 Dimensions: 9,9 x 6,0 x 3,5cm Weight: 54g CE, FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi Needle 2 charger1x Micro USB cable 1x User manual (German) Safety instructions This charger only works with rechargeable lithium-ion batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use.
The smart companion The Golisi O2 is an intelligent two-slot charger that supports you efficiently and safely with your charging processes. A chip relieves you of almost all tasks and monitors the charging process, whereby both slots are addressed individually. When the battery is fully charged, the charging process is automatically terminated, with an LED display showing you the progress. The O2 charger is equipped with various safety features that make your charging process safer. A quick-charge slot is your slot when you need something fast. A power bank function gives you power for other devices on the go. Are you still loading yourself or are you already loading? The intelligent chip, which was developed by Golisi himself, constantly accompanies you during your loading processes. It identifies the battery inserted in each slot and automatically adjusts the charging process according to the chemical composition and the performance data. You can charge different batteries in different slots at the same time. In addition, the chip monitors the entire charging process and adjusts parameters if there are any changes. In conjunction with the sensors, the temperature of the charger, for example, is constantly monitored. In addition, it has other security functions such as reverse polarity protection. Unpack, plug in - go! Golisi wants to make charging easy for you - the O2 charger also works according to this credo. It is intuitive to use and works without you having to read extensive instructions. It charges all cylindrical batteries with a length of 32-70mm - from the AA battery in your remote control to the large 26650 battery - simply connect the charger to the mains, insert the battery and off you go. If you run out of power with your other electrical devices on the go, simply place two charged batteries in the O2 charger and use the USB port on the side. as a power bank - e.g. to charge your cell phone. Robust charging The Golisi O2 charger is designed to be your long term partner. A special choice of materials makes it particularly robust. In addition, these materials are selected for "flammability" so that they are particularly temperature-resistant. The load springs and their sliding mechanism have been developed to military standards and last for >100,000 insertions. The inner workings of the O2 charger correspond to a special arrangement so that individual components cannot "get in each other's way". In addition, the chip has been built in to be particularly protected against moisture. HanseControl certified The O2 charger was intensively tested by Hermes HanseControl and checked for our promises. The result is impressive - with a grade of 2.2 and the seal "suitable for use" the internationally recognized tester confirms that we are keeping our promises. In this context, the special focus of the test was placed on the areas of function and handling. A separate test section was also devoted to processing and durability. Details Input voltage: AC 110 – 240 V | DC 12 V/1 A Input frequency: 50/60 Hz Control: DV detection, ODV detection, Overall timing, high voltage test Open circuit voltage: 5V Automatic temperature monitoring Military standard loading springs with >100,000 life Security: short circuit protection, over voltage protection, reverse polarity protection Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-ion: 2000 MA*1 or 1000 MA*2 Ni-mh and Ni-cd: 1000 MA*1 or 500 MA*2 Dimensions: 15,8 x 10,0 x 4,0 cm Weight: 228 g Hanse Hermes Control, CE, FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi O2 charger1x EU power cable1x Case/small bag1x User manual (German) Safety instructions This charger works only with rechargeable Lithium Ion, Nickel Metal Hydride and Nickel Cadmium batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use.
Smart charging is the future With the Golisi S2 charger you get a professional and efficient charger that supports you intelligently and conveniently with your charging processes. It charges almost all cylindrical batteries from AAA batteries to 26650 batteries. It automatically recognizes the inserted battery and adjusts the charging process so that your batteries are always charged gently and for a long time. The large display gives you an overview and you can read different values. A power bank function allows you to use the charger as a power storage device when you're on the go. Two intelligent bays The Golisi S2 has two independently operating charging slots, one of which has a 2A QuickCharge function. This allows you to charge different batteries at the same time, with an intelligent chip individually controlling each slot according to&rszlig; the inserted battery. During the charging process, each slot is monitored by the modern chip and its sensors. When the charging process is finished in a slot or the battery is fully charged, the charger automatically switches off the charging process. Functional and self-explanatory You can use the Golisi S2 charger almost intuitively. It makes charging easier for you. You can monitor the process and read various values on the large display. At the push of a button, the charger switches between values such as the duration of the process, the current voltage on the battery or the capacity. It also brings you another function: via a side-mounted USB port; you can use the charger as a power bank when the batteries are full and charge your cell phone on the go, for example. Safe charging The Golisi S2 is built to support you for a long time. It has been designed to be extremely robust using special materials. The load springs are designed to military standard and last >100,000 insertions. In addition, the housing is made of extremely heat-resistant materials. In combination with the intelligent chip and the sensors, this makes your charging processes safe. But the inner workings are also protected from moisture in a special way and are ETL-certified. HanseControl certified Hermes HanseControl has extensively tested the Golisi S2 charger and given it a grade of 2.1. The areas of function, handling, processing and durability were examined in particular. The very good result for the globally recognized test shows that we have thought about it and offer you a safe and durable product. Details Input voltage: AC 110 – 240 V | DC 12 V/1 A Input frequency: 50/60 Hz Control: DV detection, ODV detection, Overall timing, high voltage test Open circuit voltage: 5V Automatic temperature monitoring Military standard loading springs with >100,000 life Security: Short circuit protection, over voltage protection, reverse polarity protection Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-Ion 2000 MA*1 oder 1000 MA*2 Ni-Mh und Ni-Cd: 1000 MA*1 oder 500 MA*2 Dimensions: 17,5 x 12,7 x 4,4 cm Weight: 348g Hermes HanseControl, CE, FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi S2 charger 1x EU power cord 1x User manual (German) Safety instructions This charger works only with rechargeable Lithium Ion, Nickel Metal Hydride and Nickel Cadmium batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use.