Chargers with HD LCD Display

4 bay charger 1x2A | 2x1A | 4x0,75A USB port Display Powerbank + Induction Multifunctional charger  The GL-4 is not just a charger - it supports you in a variety of ways when it comes to energy supply in our digital and mobile life. It serves as a charger for your 18650 batteries and charges them safely and intelligently. With at least two batteries inserted, it also supports you in your everyday life as a power bank and quickly charges all your devices via USB with up to 18 watts. It charges devices that support the wireless charging standard via the wireless charging station integrated on the top. Intelligent 18650 charger The GL-4 has an intelligent chip that controls and permanently monitors the charging process. The charger recognizes the inserted batteries and selects the charging process in such a way that your batteries are charged gently and for a long time. But the GL-4 charger also monitors the charging process and intervenes, for example, if the temperature gets too high. This intelligent chip also controls the power output, so that safety is always the top priority when used as a power bank.      (Wireless) power bank With at least two inserted and charged batteries, your GL-4 charger becomes a power bank. You can charge your phone or tablet via USB or wirelessly*. In connection with the optionally available Golisi 3in1 charging cable and our 2in1 socket adapter, you always have everything with you and don't have to make sure to pack the right charging cable with you.     Intuitive operation The Golisi GL-4 is designed for ease of use. The intelligent chip does most of the work in the background - all you have to do is use the GL-4. A clear LCD display shows you details about your charging processes. The values of the individual batteries can be displayed via a button next to the display. Security The GL-4 was developed under the same requirements as all Golisi products - safety first. All materials used are particularly robust, temperature-resistant and flame-retardant. The interior has been designed in such a way that it is protected against the ingress of moisture. Moving parts such as load springs are specially manufactured and tested to military standards. Safety features of the chip such as protection against incorrect battery insertion, overcharging protection, overheating protection and permanent monitoring of the charging process simply give you a good feeling. Details Input voltage: DC 5V/3A | 9V/2A Output: 5V/3A | 9V/2A | 12V/1,5A Total Wattage: Max. 18 Watt / Wireless max. 10 Watt Control: DV detection, ODV detection, Overall timing, high voltage test Open circuit voltage: 5V Automatic temperature monitoring Military standard loading springs with >100,000 life Safety: short-circuit protection, overvoltage protection, reverse polarity protection and much more. Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-Ion 2000 MA*1, 1000 MA*2, 750MA*4 Ni-mh Ni-cd 500 MA*1, 500 MA*2, 500 MA*3, 500 MA*4 CE,FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi GL-4 3in1 charger 1x USB Typ-C cabel 1x Operation manual Safety instructions This charger works only with rechargeable Lithium Ion, Nickel Metal Hydride and Nickel Cadmium batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use. More information When used as a power bank, it is charged with 18 watts via cable and 10 watts via induction. * Your phone have to support the QI standard (standard for wireless charging). Compatible phone models: iPhone 12 series, iPhone 11 series, iPhone X series, iPhone 8 series, Huawei Mate 30 series, Mate 20 series, P30 etc., Samsung S6 series, S7 series, S8 series, S9 series, S10 series, Xiaomi , M9, Mix2S, Mix3 and many more.

1 Bay charger 1x2A | 1x1A | 1x0,5A USB port Display Small, smaller, I1  The Golisi I1 charger is one of the most compact 1 bay chargers on the market. The I1 takes on almost all cylindrical batteries with a length of 32-70mm of different chemical composition. It charges your battery with up to 2A, whereby you can flexibly adjust the charging current depending on the type of battery. An intelligent chip takes over all tasks for you. You can monitor the charging process via the large HD display. An inconspicuous companion The I1 charger from Golisi, with a width of almost 4cm and a weight of 40g, disappears almost inconspicuously in every pocket. The I1 charger comes with a micro USB connector; supplied with power, which makes it even more practical for everyday charging - you actually always have this cable with you anyway. You will receive your I1 charger together with a small, practical transport bag, where the cable or a socket adapter can also be stowed away. So you always have access to everything in one place. Small but no less intelligent The I1 charger has been developed in such a way that you can use it as simply and intuitively as possible. Unfortunately, we have not yet developed an automatic mechanism for the battery insertion process - but the charger does everything else for you. The intelligent chip, which is again separately protected inside the I1 housing, recognizes the inserted battery type and its chemical composition and automatically adjusts the charging process so that your battery is charged gently and for a long time. When the battery is full, the chip automatically ends the charging process. During the charging process, the chip takes on the important function of monitoring - the chip reacts to changes every millisecond and, for example, lowers the charging current if the temperature rises. Everything in view The Golisi I1 charger has a large, easy-to-read HD LCD display and a button below the display. Various information such as the type of battery inserted or the charging progress are shown on the display. You can also display other values ​​such as the current voltage on the battery, the mAh charged or the charging time by pressing the button. With lithium-ion batteries, the button has another function - by pressing the button longer, you can select the desired charging current (0.5A, 1.0A, 2.0A) and thus the charging process and affect the loading time. Even more? The Golisi I1 charger has been developed in accordance with all the safety and sustainability requirements that we also place on the other Golisi chargers. The housing is made of flame-retardant materials and all the components inside are arranged in such a way that they do not "get in each other's way". The chip is particularly protected against the ingress of moisture. But sustainability also plays a major role today - this is how the I2 charger was prepared for a long use. Military standard load springs promise durability even with >100,000 insertion processes. In addition, you will receive your I1 charger in packaging without air, which is also 99% recyclable. Details Control: DV detection, ODV detection, Overall timing, high voltage test Open circuit voltage: 5V Automatic temperature monitoring Military standard loading springs with >100,000 life Safety: Short-circuit protection, overvoltage protection, reverse polarity protection and much more. Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-Ion 2000 MA*1, 1000 MA*1, 500 MA*1 Ni-mh Ni-cd 500 MA*1 CE, FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi I1 charger 1x Transport bag1x MicroUSB cable 1x User manual (German) Safety instructions This charger works only with rechargeable Lithium Ion, Nickel Metal Hydride and Nickel Cadmium batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use.

2 Bay charger 1x2A | 2x1A  USB port Display Compact all-rounder  The Golisi I2 charger belongs to the family of Golisi smart chargers and allows you to charge two cylindrical batteries with a length of 32-70mm. It comes with a USB port. supplied with electricity and is a compact and reliable companion. With a 2A quick charging slot, you can charge a battery in no time (QuickCharge). An intelligent chip analyzes the inserted battery and automatically adjusts the charging current. A large display gives you all the important values ​​of a charging process in real time. The ideal companion The I2 charger is smaller than the palm of your hand and is therefore the ideal companion for on the go - it fits in any pocket. Since the I2 charger is powered via USB (5V/2A), many cables and socket adapters from other manufacturers are usually compatible and you can save even more luggage. Of course, we recommend using our powerful Golisi socket adapter, with which you can address two devices via USB at the same time. And so that everything is always carefully stowed away, you will receive a suitable transport bag for your I2 charger.  Just charge it up With the I2 charger, Golisi makes it easy for you - apart from inserting the battery, the charger takes care of all tasks. The intelligent chip not only recognizes the battery and selects the appropriate charging current, it also monitors the entire charging process and reacts to changes. In conjunction with the built-in sensors, the Golisi I2 charger protects itself again, especially when monitoring the temperature. The chip also recognizes an incorrectly inserted battery and displays an error message. In addition, the chip also monitors overcharging and switches off automatically in this case. Security and sustainability Like all Golisi chargers, the Golisi I2 was designed to be particularly safe. The housing is made of flame-retardant materials and all components inside are arranged in such a way that risks are "minimised to the maximum". The chip is particularly protected against the ingress of moisture. But sustainability also plays a major role today - this is how the I2 charger was prepared for a long use. Military standard load springs promise durability even with >100,000 insertion processes. In addition, you will receive your I2 charger in packaging without air, which is also 99% recyclable. Details Input voltage: DC 5V / 2A Control: DV detection, ODV detection, Overall timing, high voltage test Open circuit voltage: 5V Automatic temperature monitoring Military standard loading springs with >100,000 life Safety: short-circuit protection, overvoltage protection, reverse polarity protection and much more. Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-Ion 2000 MA*1, 1000 MA*2 Ni-mh Ni-cd 500 MA*1, 500 MA*2 CE, FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi I2 charger 1x Transport bag1x Micro USB cable 1x User manual (German) Safety instructions This charger works only with rechargeable Lithium Ion, Nickel Metal Hydride and Nickel Cadmium batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use.

4 Bay charger 1x2A | 2x1A | 4x0,5A USB port Display Proven newly developed  The I4 charger from Golisi is the result of the consistent further development of our most popular series, the S series. The I4 charger is a bit slimmer than the S4 charger and is equipped with a USB port. powered. It charges almost all cylindrical batteries with a length of 32-70mm. It offers space for up to 4 batteries, with each slot being addressed individually. An intelligent chip takes over important tasks for you. A large HD LCD display shows various values ​​and supports you in monitoring the charging process. Smart and functional The Golisi I4 charger is equipped with an intelligent chip that relieves you of important tasks. The chip recognizes the inserted battery and its chemical composition and automatically selects the ideal charging conditions so that your battery is charged gently and for a long time. In addition, the chip monitors the charging process with the support of sensors and adjusts it within milliseconds in the event of deviations. If a battery is fully charged, the chip automatically switches off the charging process at the corresponding slot. Intuitive operation With the I4 charger you don’t have to do anything except insert a battery. The charger does everything else for you. The charger informs you about the individual charging processes per slot via the large, easy-to-read HD LCD display. In addition to values ​​such as the identified battery, the charging current selected by the chip and the overall progress, you can also display the current voltage on the battery, the charged mAh and the charging time by simply pressing a button. When time is of the essence The Golisi I4 charger has four individually addressable bays, with one of the bays being specially marked with "2A". If you are in a hurry, you can charge a single battery with up to 2A via this slot. Safe charging must be easy The Golisi I4 has been thoughtfully designed. In addition to a careful choice of materials with particularly heat-resistant and flame-retardant materials, the inner workings were also developed in such a way that any malfunctions are prevented. The chip is ETL-certified and is therefore particularly protected against moisture. Moving parts such as the load springs and their sliding plates are specially manufactured to military standards so that they will last >100,000 insertions. The chip also performs important safety functions: In addition to reverse polarity protection and overcharge protection, continuous temperature monitoring during the charging process plays a significant role. Details Input voltage: DC 5V / 2A Control: DV detection, ODV detection, Overall timing, high voltage test Open circuit voltage: 5V Automatic temperature monitoring Military standard loading springs with >100,000 life Safety: short-circuit protection, overvoltage protection, reverse polarity protection and much more. Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-Ion 2000 MA*1, 1000 MA*2, 500MA*4 Ni-mh Ni-cd 500 MA*1, 500 MA*2, 500 MA*3, 500 MA*4 CE,FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi I4 Charger 1x Micro USB cable 1x User manual (German) Safety instructions This charger works only with rechargeable Lithium Ion, Nickel Metal Hydride and Nickel Cadmium batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use.

2 Bay charger 1x2A | 2x1A Socket connection Display Power bank function Smart charging is the future  With the Golisi S2 charger you get a professional and efficient charger that supports you intelligently and conveniently with your charging processes. It charges almost all cylindrical batteries from AAA batteries to 26650 batteries. It automatically recognizes the inserted battery and adjusts the charging process so that your batteries are always charged gently and for a long time. The large display gives you an overview and you can read different values. A power bank function allows you to use the charger as a power storage device when you're on the go.  Two intelligent bays The Golisi S2 has two independently operating charging slots, one of which has a 2A QuickCharge function. This allows you to charge different batteries at the same time, with an intelligent chip individually controlling each slot according to&rszlig; the inserted battery. During the charging process, each slot is monitored by the modern chip and its sensors. When the charging process is finished in a slot or the battery is fully charged, the charger automatically switches off the charging process. Functional and self-explanatory You can use the Golisi S2 charger almost intuitively. It makes charging easier for you. You can monitor the process and read various values ​​on the large display. At the push of a button, the charger switches between values ​​such as the duration of the process, the current voltage on the battery or the capacity. It also brings you another function: via a side-mounted USB port; you can use the charger as a power bank when the batteries are full and charge your cell phone on the go, for example. Safe charging The Golisi S2 is built to support you for a long time. It has been designed to be extremely robust using special materials. The load springs are designed to military standard and last >100,000 insertions. In addition, the housing is made of extremely heat-resistant materials. In combination with the intelligent chip and the sensors, this makes your charging processes safe. But the inner workings are also protected from moisture in a special way and are ETL-certified. HanseControl certified Hermes HanseControl has extensively tested the Golisi S2 charger and given it a grade of 2.1. The areas of function, handling, processing and durability were examined in particular. The very good result for the globally recognized test shows that we have thought about it and offer you a safe and durable product. Details Input voltage: AC 110 – 240 V | DC 12 V/1 A Input frequency: 50/60 Hz Control: DV detection, ODV detection, Overall timing, high voltage test Open circuit voltage: 5V Automatic temperature monitoring Military standard loading springs with >100,000 life Security: Short circuit protection, over voltage protection, reverse polarity protection Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-Ion 2000 MA*1 oder 1000 MA*2 Ni-Mh und Ni-Cd: 1000 MA*1 oder 500 MA*2 Dimensions: 17,5 x 12,7 x 4,4 cm Weight: 348g Hermes HanseControl, CE, FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi S2 charger 1x EU power cord 1x User manual (German) Safety instructions This charger works only with rechargeable Lithium Ion, Nickel Metal Hydride and Nickel Cadmium batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use.

4 Bay charger 1x2A | 4x1A Socket connection Display Simply load at the highest level  The Golisi S4 charger is designed for simple but professional use. The highly intelligent charger with four bays can take on almost all cylindrical batteries. It supports you in your charging process with a chipset that automatically recognizes the inserted battery(ies) and adjusts the charging process accordingly for gentle and efficient charging. With a 2A fast charging slot, a single battery is charged quickly. The HD LCD display shows you all the important information about the current charging process. Functional and intuitive The Golisi S4 charger makes charging easy for you. A high-resolution LCD display provides information about the inserted batteries and the charging process. At the touch of a button, it also shows you various values ​​of your charging process, such as duration, current voltage on the battery or the charged mAh. Each shaft is addressed individually. Enduring, safe and durable The Golisi S4 charger will be your companion for many years. We only use materials for production that are designed for robust and safe use. Extremely heat-resistant materials such as ABS+PC+fireproof make your charging processes safe in conjunction with the sensor-controlled temperature monitoring. Load springs according to military standards ensure that your batteries always find their place. The inner workings and especially the electronics are also protected and ETL-certified. The chip thinks for you The Golisi S4 is a highly intelligent charger that always keeps an eye on the charging process using a modern chipset and sensors. It adjusts the charging process in each slot individually according to the battery inserted, so that your battery is charged gently and for a long time. The charging process is continuously monitored by the chip and adjusted if necessary. If your battery is fully charged, the chip will switch off the charging process for the slot accordingly. HanseControl certified The Golisi S4 charger was closely examined by HanseControl. In particular, the areas of function, handling, processing and durability have been tested. The test result confirms our claim - with a grade of 2.1 and the "Useful" seal, the S4 shows what it's capable of. Details Input voltage: AC 110 – 240 V oder DC 12 V/1 A Input frequency: 50/60 Hz Steering: DV detection, ODV detection, Overall timing, high voltage test Open circuit voltage: 5V Automatic temperature monitoring Military standard loading springs with >100,000 life Security: short circuit protection, over voltage protection, reverse polarity protection Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-Ion 2000 MA*1, 1000 MA*2,500MA*3 or 500MA*4 Ni-mh Ni-cd 500 MA*1, 500 MA*2, 500 MA*3 or 500 MA*4 Dimensions: 17,5 x 15,7 x 4,4 cm Weight: 435g CE, FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi S4 charger 1x EU power cord 1x User manual (German) Safety instructions This charger works only with rechargeable Lithium Ion, Nickel Metal Hydride and Nickel Cadmium batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use.

6 Slot charger 3x2A | 6x1A Socket connection Display Here comes the power  The Golisi S6 is a six-bay charger that can charge almost any cylindrical battery, from AAA batteries to thicker 26650 batteries. Each slot is addressed individually, so that you can charge six batteries of different sizes and chemical compositions at the same time. It offers you an incredible 3 QuickCharge slots (marked with "2A") and charges three batteries at the same time with 2 amps or six batteries at the same time with 1 amps. The S6 charger does without an additional, heavy and bulky power supply. Convenient operation The S6 charger is easy to use and takes care of important things like monitoring the charging process. It is operated via the large, easy-to-read HD LCD display, with an intelligent chipset maintaining control of the charging process. This chip recognizes the inserted batteries and automatically optimizes the charging process. If a battery is fully charged, the charging process is automatically terminated. Sensor-based monitoring The intelligent chip in your Golisi S6 charger not only recognizes the inserted batteries and adjusts the charging process accordingly - it also monitors each individual slot during a charging process and adjusts the specifications if anything changes. In conjunction with the sensor-based temperature monitoring, the charger switches off automatically, for example, regardless of the charge level if there is a risk of overheating. So that this doesn't happen so quickly, the Golisi S6 is equipped with well thought-out cooling fins on the side and on the back. Quality when loading The Golisi S6 charger has been designed with safety and durability in mind. Particularly robust materials ensure a long service life, with Golisi following international standards here. The load springs and their sliding plates have been manufactured to military standards so that they can withstand a load capacity of >100,000 insertion processes. Other properties such as flame-retardant materials in the housing meet the highest quality and safety standards. The socket connection, which contains an extremely small power supply unit in the S6 charger, is UL-certified. The inner workings and especially the chipset have been specially protected against moisture.  HanseControl certified As part of the HanseControl certification, Hermes confirms that the S6 charger is a safe and durable product. During this test, special attention was paid to the areas of function, handling, processing and durability. With a grade of 2.1 and the "suitable for use" award, the certification is meaningful and supports our claim to our products. Details Input voltage: AC 110 – 240 V oder DC 12 V/1 A Input frequency: 50/60 Hz Control: DV detection, ODV detection, Overall timing, high voltage test Open circuit voltage: 5V Automatic temperature monitoring Military standard loading springs with >100,000 life Safety: Short-circuit protection, overvoltage protection, reverse polarity protection and much more. Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-Ion 2000 MA*3, 1000 MA*6 Ni-mh Ni-cd 500 MA*1, 500 MA*2, 500 MA*3, 500 MA*4, 500 MA*5 oder 500 MA*6 Dimensions: 19,5 x 15,7 x 4,4 cm Weight: 535g CE, FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi S6 charger 1x EU power cord 1x User manual (German) Safety instructions This charger works only with rechargeable Lithium Ion, Nickel Metal Hydride and Nickel Cadmium batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use.