1-slot chargers
Small, smaller, I1 The Golisi I1 charger is one of the most compact 1 bay chargers on the market. The I1 takes on almost all cylindrical batteries with a length of 32-70mm of different chemical composition. It charges your battery with up to 2A, whereby you can flexibly adjust the charging current depending on the type of battery. An intelligent chip takes over all tasks for you. You can monitor the charging process via the large HD display. An inconspicuous companion The I1 charger from Golisi, with a width of almost 4cm and a weight of 40g, disappears almost inconspicuously in every pocket. The I1 charger comes with a micro USB connector; supplied with power, which makes it even more practical for everyday charging - you actually always have this cable with you anyway. You will receive your I1 charger together with a small, practical transport bag, where the cable or a socket adapter can also be stowed away. So you always have access to everything in one place. Small but no less intelligent The I1 charger has been developed in such a way that you can use it as simply and intuitively as possible. Unfortunately, we have not yet developed an automatic mechanism for the battery insertion process - but the charger does everything else for you. The intelligent chip, which is again separately protected inside the I1 housing, recognizes the inserted battery type and its chemical composition and automatically adjusts the charging process so that your battery is charged gently and for a long time. When the battery is full, the chip automatically ends the charging process. During the charging process, the chip takes on the important function of monitoring - the chip reacts to changes every millisecond and, for example, lowers the charging current if the temperature rises. Everything in view The Golisi I1 charger has a large, easy-to-read HD LCD display and a button below the display. Various information such as the type of battery inserted or the charging progress are shown on the display. You can also display other values such as the current voltage on the battery, the mAh charged or the charging time by pressing the button. With lithium-ion batteries, the button has another function - by pressing the button longer, you can select the desired charging current (0.5A, 1.0A, 2.0A) and thus the charging process and affect the loading time. Even more? The Golisi I1 charger has been developed in accordance with all the safety and sustainability requirements that we also place on the other Golisi chargers. The housing is made of flame-retardant materials and all the components inside are arranged in such a way that they do not "get in each other's way". The chip is particularly protected against the ingress of moisture. But sustainability also plays a major role today - this is how the I2 charger was prepared for a long use. Military standard load springs promise durability even with >100,000 insertion processes. In addition, you will receive your I1 charger in packaging without air, which is also 99% recyclable. Details Control: DV detection, ODV detection, Overall timing, high voltage test Open circuit voltage: 5V Automatic temperature monitoring Military standard loading springs with >100,000 life Safety: Short-circuit protection, overvoltage protection, reverse polarity protection and much more. Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-Ion 2000 MA*1, 1000 MA*1, 500 MA*1 Ni-mh Ni-cd 500 MA*1 CE, FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi I1 charger 1x Transport bag1x MicroUSB cable 1x User manual (German) Safety instructions This charger works only with rechargeable Lithium Ion, Nickel Metal Hydride and Nickel Cadmium batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use.
The inexpensive start The Needle series from Golisi offers you an economical entry into the world of chargers. With the Needle 1, you get a one-shaft charger that you can use to charge lithium-ion batteries of various sizes. With a width of almost 34mm and 37 grams, it is also your compact companion on the go. It can be connected to the USB portß can be used almost anywhere. Automatic monitoring The Needle 1 charger is controlled by a chip that monitors the charging process. This chip, which also protects against overcharging or incorrectly inserted batteries, automatically recognizes the charging process and stops it as soon as your battery is fully charged. He is also master of the real-time automatic temperature monitoring. An LED above the charging slot signals that the charger is ready and also indicates a charging process or a fully charged battery. Small but robust While the Needle 1 charger is the simplest charger in the Golisi family, it is no less robust than the rest of the family. Particularly resilient and heat-resistant materials ensure long-lasting use. Military-grade load springs and contact plates guarantee >100,000 insertions. The inner workings were also developed in such a way that it lasts a particularly long time. Details Output voltage: DC 5 V /1,0 A Open circuit voltage: 4,2 V Output current: 0,5 A Automatic temperature monitoring Indicator light: Green: ready to charge or battery full Red: Charging in progress Military standard loading springs with >100,000 life Security: short circuit protection, over voltage protection, reverse polarity protection Housing material: PC/ABS, flame retardant Operating temperatur: 0-40º C Charging current options: Li-Io 1x0,5A Dimensions: 9,9 x 3,5 x 3,4cm Weight: 37g CE, FCC, EMC Test, UL Test 99.9% of the packaging is made from recyclable materials Scope of delivery 1x Golisi Needle 1 charger1x Micro USB cable 1x User manual (German) Safety instructions This charger only works with rechargeable lithium-ion batteries. This charger is for indoor or vehicle use only. DO NOT use in rain, snow, high or low temperature, direct sunlight or high ambient temperature. DO NOT allow children to use this product without parent or adult supervision. Please DO NOT disassemble or assemble this charger. Please DO NOT use this charger outside the operating temperature range of 0 to 40 °C. Celsius. Please do not leave your device unattended while it is in use.